alpereninyeri
TREN

Leica S (Typ 007) vs Leica S3: read noise comparison

Input-referred read noise at base ISO: Leica S (Typ 007) 6.1 e⁻ (ISO 100), Leica S3 5.9 e⁻ (ISO 100).

Leica S (Typ 007)

The Leica S (Typ 007) was measured at 8 ISO settings from ISO 100 to ISO 12800. Values are Bill Claff's (Photons to Photos) direct measurements from raw files.

At base ISO (100) read noise is 1.88 DN, or 6.1 electrons at the sensor. From ISO 800 up the camera is effectively ISO-invariant: raising ISO further doesn't meaningfully lower shadow noise. Settings above ISO 6400 don't change analog gain (digital push). Full well at base ISO is about 52,703 electrons; unity gain is around ISO 320.

Leica S3

The Leica S3 was measured at 10 ISO settings from ISO 100 to ISO 51200. Values are Bill Claff's (Photons to Photos) direct measurements from raw files.

At base ISO (100) read noise is 2.46 DN, or 5.9 electrons at the sensor. From ISO 800 up the camera is effectively ISO-invariant: raising ISO further doesn't meaningfully lower shadow noise. Full well at base ISO is about 39,621 electrons; unity gain is around ISO 240.

Leica S (Typ 007) vs Leica S3 read noise table

ISOLeica S (Typ 007)Leica S3
1001.8792.462
2002.0283.031
4003.0745.134
8005.8565.776
160010.62910.703
320020.96622.316
640040.22443.111
1280070.03585.036
25600–167.730
51200–342.509

Popular comparisons

All cameras · Open the full tool

Alperen Kılıç · Read Noise

Data: Photons to Photos · © William J. Claff