Canon EOS R6 Mark II vs Sony a7 IV: read noise comparison

The Canon EOS R6 Mark II was measured at 33 ISO settings from ISO 50 to ISO 204800. Values are Bill Claff's (Photons to Photos) direct measurements from raw files.

At base ISO (100) read noise is 1.04 DN, or 6.2 electrons at the sensor. A second gain (dual gain) kicks in at ISO 400, cutting input-referred read noise by about 1.6 stop. From ISO 6400 up the camera is effectively ISO-invariant: raising ISO further doesn't meaningfully lower shadow noise. Settings above ISO 51200 don't change analog gain (digital push). Full well at base ISO is about 95,315 electrons; unity gain is around ISO 600.

The Sony a7 IV (ILCE-7M4) was measured at 37 ISO settings from ISO 50 to ISO 204800. Values are Bill Claff's (Photons to Photos) direct measurements from raw files.

At base ISO (100) read noise is 1.12 DN, or 4.6 electrons at the sensor. A second gain (dual gain) kicks in at ISO 400, cutting input-referred read noise by about 1.4 stop. From ISO 3200 up the camera is effectively ISO-invariant: raising ISO further doesn't meaningfully lower shadow noise. Settings above ISO 51200 don't change analog gain (digital push). Full well at base ISO is about 65,432 electrons; unity gain is around ISO 410.